International Interprotect Epoxy Barrier Paint

£210.00

International Interprotect is a high performance two pack primer/undercoat. It’s perfectly formulated for polyester, vinylester, epoxy, steel, aluminium, ferro cement and timber hulls, above and below the waterline. It is our recommended high build epoxy paint for use with CPES and Fill-It when repairing osmosis blistering (the pox) on polyester glass hulls

Clear
SKU: N/A Category: Miscellaneous

Description

International Interprotect is a high performance two pack primer/undercoat. It’s perfectly formulated for polyester, vinylester, epoxy, steel, aluminium, ferro cement and timber hulls, above and below the waterline. It is our recommended high build epoxy paint for use with CPES and Fill-It when repairing osmosis blistering (the pox) on polyester glass hulls.

Quick drying, easy to apply epoxy primer for high performance protection.

  • Excellent anti-corrosive protection
  • Recoatable with itself for periods of up to 6 months
  • Antifouling tie-coat for use over epoxy primers
  • Good abrasion resistance
  • Recoatable with itself for periods of up to 6 months
  • Quick drying
  • Easy sanding

 

The product is supplied with 3.75 litres of base in a 5 litre can. The curing agent (1.25 litres) is added to the can which is then stirred and left for 10 minutes to allow bubbles to disperse.

This is not carried as a stock item by us, and is purchased to order. Dispatch is normally in less than a week after ordering.

International Interprotect Product Information

Interprotect may be applied by brush or roller. 1 to 5 coats are recommended and practical coverage is 8 m²/L per coat.

Colour YPA400*-White, YPA403*-Grey
Finish Matt
Specific Gravity 1.4
Volume Solids 45%
Mix Ratio 3:1 by volume
Converter/Curing Agent YPA404*
Typical Shelf Life 2 yrs
VOC (As Supplied) 464 g/lt
Unit Size 5 lt

Curing

Will not cure below 5°C. Product temperature should be minimum 10°C/50°F and maximum 35°C/95°F. Ambient
temperature should be minimum 10°C/50°F and maximum 35°C/95°F. Substrate temperature should be minimum 10°C/50°F
and maximum 35°C/95°F.

Method

Remove blast/grinding/sanding residues with a clean air line & sweep with a clean brush, or vacuum clean for best
results. On blasted and rough ground surfaces do not try and wipe with rags and thinners as the rags will catch and
leave particles of cloth behind. Apply required number of coats, detailed in the specification sheets, by method chosen or
stipulated, allowing required overcoating interval between applications. Thin first coat applications International Epoxy Thinners #7.

Compatibility

Polyester, Vinylester, Epoxy, Steel, Aluminium, Ferro cement and Timber. For use above and below the waterline.
Antifoulings may be applied directly after suitable preparation. Must be overcoated with Perfection Undercoat or YRA600
Undercoat prior to applying two pack polyurethane top coats. It should not be used over any one pack products.

Interprotect Stock and Supply Timing

Please note that we do not stock International Interprotect, but buy it to order.

We can normally fulfil orders within 3 working days of an order being placed.

Full Product Information

International Interprotect Instructions

Manufacturers UK Site

Additional information

Weight7 kg
Colour

Grey, White

MSDS

International Interprotect MSDS

International Interprotect White 400 A sds

International Interprotect Grey 403 A

International Interprotect 404 B

Reviews

There are no reviews yet.

Be the first to review “International Interprotect Epoxy Barrier Paint”

You may also like…